Driveway Cleaning Cannock
So this week we were back over in Cannock cleaning a dirty block paving driveway.
We throught we would run you through the steps on how we deep cleaned this customer driveway. Stage 1: Flat Surface Cleaning First off we cleaned the driveway using our flat surface cleaner to remove the majority of grime and weeds/moss from in between the paving joints. Stage 2: First Rinse Down It was then time to give the drive a quick rinse down so we could see more clearly the edging which the floor cleaner wasn't able to get to. Stage 3: Cutting in the Edges Once we had cleaned down the driveway with floor cleaner and rinsed down it was then time to cut in the edges using our turbo nozzle and lance Once the edges had been cut in we also gave the driveway a quick clean using the turbo nozzle to remove any stubborn weeds which the floor cleaner hadn't quite managed to remove.. Stage 4: Quick Rinse Down k Using the turbo nozzle and lance is a messy job so another rinse down of all the surrounding areas was required to shift any much it had created. Stage 5: Chemical Treatment Now the area is fully cleaned it was time to treat the block paving with a treatment to ensure any growth was killed and removed. This is left on for around 15 minutes before being rinsed off. Stage 6: Final Rinse Down The final stage of the driveway cleaning is a full rinse down ensuring all the treatment has been removed along with any last bits of debris. Stage 7: Re-Sand The re-sand has to be completed on a separate day du to the driveway needing time to completely dry out before the sanding can be complete. Watch us in action below in our latest YouTube Video:
If you are looking for a professional company to carry out Driveway Cleaning in Cannock
Look no further than JetOWash Ltd For a free quotation you can call us on 01902 903709 alternatively you can fill out the form below Comments are closed.
|