One of our recent project was to undertake a render clean on these beautiful apartments over in Wolverhampton.

After speaking with the render manufacturer who had stated the best way to clean the render the property management company new exactly what they wanted and how they wanted the job to be undertaken.

After our first initial phone call with the property management company we fully explained our methods of cleaning render and it was exactly what they were looking for.

We arranged a site visit to view the severity of the soiling on the render whilst also carry out a demonstration clean for the client to show exactly the results our render leaning service is able to achieve. 

After the sample clean had been carried out the client and the tenants of the apartments were thrilled with the results and couldn't wait to get our company onboard to under the full buildings render clean.

The chosen method of cleaning this render was using a biocide soft wash treatment, this is applied via a specialist low pressure soft wash system to ensure no damage is caused to the delicate render surface.

Below is a short video showing before, during and after the render clean -

​We had a call from a property management company who had a problem with one of their property’s guttering.
They stated the issue was there was no access to rear or side of the property and the build was 4 stories high, they had had several companies visit the site stating that they are unable to clear the guttering due to the access.
 
As you can see in the photo below the building backed onto a river and there were just under 1.5m of room between the building and the river making it impossible to access via a MEWP or portable scaffolding tower. 

​The cost to fully scaffold the rear of the building would have gone into the thousands but luckily enough we had a solution.
After carrying out a site visit and providing a set of RAMS the property management company were happy to go ahead and have the work under taken.
 
Using our carbon fibre 40ft gutter cleaning poles, wireless inspection camera and 3000w gutter vacuum we were able to clear the gutters with ease.
 
Below is a short video of us in action tackling these hard to reach gutters. 

We had many pedestrians stopping to watch us in action and many people complement on what a fabulous bit of kit the gutter vacuum system was and how they couldn’t believe it was able to clear gutters at such height.
 
It’s not only gutter cleaning we offer, feel free take a look thought our website to view the full range of services we offer to bother commercial and residential clients – www.jetowash.com
 
Thank you for taking the time to read our latest blog, to keep up to date on our latest projects undertaken you can follow us on Facebook, Twitter, Instagram or Google.
 

​RAF Cosford Paving Cleaning
 
After carrying out a site visit and undertaking all of the usual Health and Safety procedures (Risk Assessment, Method Statement, COSHH Assessment etc) it was time for us to start this exciting project.
After the first initial site visit and seeing the degree of organic soiling present we knew this site would really benefit from a deep clean and we couldn’t wait to get started on reforming the site back to its former glory.
 
Finally, this week the team have been able to start cleaning the first stage of an ongoing project at RAF Cosford.
 
The project is to clean the paving onsite RAF Cosford as not only is it covered in unsightly moss, algae and weeds it’s starting to become unsafe to walk on due to the build-up of algae becoming slippery once wet which is a major risk to everyone’s safety.
 
Using the rotary floor cleaner set up with the correct nozzles and our van mounted 200 bar pressure washer the organic soiling was easily removed, a post treatment was applied for the finishing touch and to ensure all lichens (black spots) were removed/killed.
 
As you can see from the short video below the results achieved were nothing short of fabulous.
 
Watch us in action below 

​Please feel free to like, comment and subscribe to our YouTube channel to keep updated with the latest projects undertaken by the team.
 
We look forward to carrying on with the next stage of the project which will be undertaken in November, so keep your eyes peeled for the video of the next area we clean at RAF Cosford.
 
 
For all your exterior cleaning needs please feel free to visit our home page or contact us on 01902 903709 to arrange your free site survey/quotation.
 
Thank you for taking the time to read our latest blog post.

What added to the pressure was the fact that this school has the leisure centre on site which is open 7 days a week and is quite a busy place with visitors coming and going throughout the whole day,  this made the job a little harder but didn't phase our team.

Take a look at some of the before and after photos below

​I'm sure you'll agree, they did a fabulous job and made this block paving look like new!

​Block Paving Clean in Stafford, Staffordshire.
 
So, one of this week’s jobs was cleaning a large area of block paved area that was heavily soiled in white lichens and algae. The block paving hadn’t been cleaned in many years and was in desperate need of a deep cleanse.
 
The first job was to get the pressure washer set up and talk the customer through the procedure to ensure minimal disturbance occurs while the work is being carried out.
 
Once the machines were ready the team then got to work cleaning the block paving…
 
Due to the heavy white lichen the turbo nozzle and lance was need to remove the tops off these stubborn lichens.

​After a few hours, the paving started to take shape and the naturally colours of the pavers started to show through.

Once all the paving had been pressure washed it was then time to post treat the area to remove all the black and white lichens spores that were left, the treatment was applied, agitated then left to dwell for around 15-20 minutes to fully ensure all the lichens had fully disappeared.
Once we were happy they had all been removed the treatment was then rinsed off with a lower pressure rinse nozzle.
 
Before the clean was complete the full area and surroundings were cleaned down including all windows and walls leaving the areas free from any muck/sand debris.
 
The paving was then left for a couple of days to dry out before the team then headed back for a second visit to re-sand the blocks for the final touch.
 
The customer was over the moon with the results achieved and couldn’t believe just how well the paving looked once again.
 
Take a look at the video we made showing the fantastic results achieved once again by the team at Jetowash. 

​This week one of the team were over in Cannock restoring a driveway for a customer whose concrete imprinted driveway was in desperate need of attention. 

A few days later we had had a couple of nice sunny dry days so the drive had fully dried so it was time for the team to get to work reviving the driveway for the customer. Due to the condition of the imprinted concrete and sealer a few coats of sealer along with a colour tint were needed to bring this back to its original colour. ​

The customers had stated that once the driveway was wet it become very slippery, so on the finally coat we applied an anti-slip additive into the sealer to prevent the driveway become slippery once wet. 

As you can see from the photos the drive looks as good as new and the customer could not believe the results we achieved.
 
Another drive clean and seal completed in Cannock with another very happy customer :)

​With the season in full swing it’s been another busy week for the team at JetOWash.
One of the jobs we had to tackle this week was a block paved drive to be cleaned and re-sanded over in Cannock.
The customer had a friend recommend our service to her and thought it was time she hired a professional drive cleaning company to carry out a deep clean on her block paving at her home in Cannock.
One of the team visited the customer prior to the job to explain the procedure and to give a free no obligation quotation that the customer was happy with and wanted to get booked in as soon as possible.

On the day of the clean, the rain was coming down thick and fast but this didn’t stop us getting to work on reviving the driveway back to its former glory.
Once the machine was fully warmed up and ready to get to work our rotary floor cleaner was used to rip through all the moss, weeds and algae present on the driveway and did this with great success.
Once the whole drive had been cleaned via the rotary floor clearer we then fully rinsed down the areas and scooped up all the much into bags ready to be taken away with us leaving the customer with no mess left at her home at all, for the finishing touch on the day all lower windows on her house were cleaned.

​With the drive clean now completed it was a case of leaving the driveway to fully dry before re-visiting the property to brush kiln dried sand in to the joints block paving’s joints.
To apply the sand the driveway must be fully dry so we are able to brush the sand into the block paving smoothly with the sand getting stuck to damp patches of the paving.
Re-sanding the block paving is an important part of the process as the this give the block paving its strength and competence. Without the jointing sand the paving would move and which could result in the whole drive being ruined. 

So, as you can see the driveway has now been both deep cleaned and re-sanded to a very high standard and as you can image the customer was over the moon with the results we achieved.


​Below is a short video of the drive clean and re-sand -


 

​Why not subscribe to our YouTube channel to keep updated with our latest videos –

Thank you for taking the time to read our blog.

For more information on our drive cleaning service in Cannock why not visit our website.

 

With summer on its way things are really getting busy for the team here at JetOWash.
We have had a very productive week with a new van added to the fleet and many big jobs completed for local property management company's while still keeping our domestic customers happy reviving their driveways, patios, roofs, guttering and render to name a few.

So the last stage of the clean was a low pressure rinse down, making sure all of the walls, fence panels and lawn was free from debris and post treat the driveway to make sure all the lichen spores were dead to try and keep the drive cleaner for longer. 

With the clean complete as you can see in the photo (above on the right) it's a case of leaving the driveway to dry out for a couple of days before we return to re-sand the block paving giving it the final finishing touch.

For a FREE quotation or sample clean please call us on 01902 903709 

Many Thanks 
JetOWash Ltd

As I'm sure you will agree, the render has a very grey look making it look very grubby and unappealing  which would've built up over time from a mixture of air pollution, changing weather conditions and general organic growth.

This is never an issue as all render can be restored with the right expertise, knowledge and treatments.

Our team didn't delay in getting the job started, with the render clean being in Stafford Town Centre it was paramount that we followed Health and Safety closely to ensure the members of public and staff were protected at all times, this allowing a smooth cleaning process.
All treatments used by JetOWash are approved by the HSE.

With the huge traffic in Stafford Town Centre, many of the public stopped to compliment the render clean and couldn't believe the transformation we were able to achieve, bringing this dirty looking render back to its former glory and giving it some extra kerb appeal.

For more information on our render cleaning service why not visit our website
​
Alternatively you can call us on 01902 903709 to arrange your free site survey/quotation or sample clean today.

Below is a short video of the render clean completed over in Stafford this week, don’t forget to subscribe to our YouTube channel to keep up dated on our latest work completed.